Detail 210 FBLS, 410 FBLS
210 FBLS, 410 FBLS
Balancing Machines for Turbocharger Turbine Rotors
• Automatic balancing
• Short cycle times with extremely high initial unbalance
• Air-bearing support for extreme measurement accuracy
• Digital measured data processing and numerically controlled unbalance correction
• Effective milling correction in machining center
• Easy change over to other rotor types
Range of application
Measurement and correction of unbalance in machined turbocharger turbine rotors. Use of the machine in mid- to high-volume production. Fully automatic unbalance measurement and correction in two planes and in up to two correction steps. Manual loading and unloading.
Design
Two-station machine with measuring and correction station and fully automatic operating sequence. Vertical balancing unit on a vibration-optimized machine frame of aluminium profile, type-dependent, exchangeable precision air-bearing support for the turbine rotor, drive through a drive-plate with air-jet adapted to the rotor diameter.
Measured data processing by CAB 750 measuring unit.
Correction station configured as a vertical traversing-stand machining center, with CNC machining unit for unbalance correction by polar milling on the hub-side and at the rear of the turbine rotor. Integrated tool changer with 12 tool positions.
Sequence of operations
• The work-pieces are removed from the conveying equipment, provided with a reference mark and inserted into the measuring station
• Automatic measuring run. Calculate and transfer the processing values to the correction station, brake to a stop
• Remove the rotor from the measuring station and load it into the correction station, align the reference mark
• Automatic correction: clamp, select the right correction tool, index to the correction position and mill the 1st plane. Index to the correction position for the 2nd plane, repeat the milling process and unclamp
• Transfer the rotor to the measuring station and start the check run. If the unbalance after the 1st correction step is not in tolerance, a 2nd correction step can be carried out
• Remove the work-piece and place it on the conveyor
Distributor agent penjualan service Repair mesin balancing, Balancing system for miniature high-speed rotors, Desktop balancing machines, horizontal balancing machines, vertical balancing machines.
Kalibrasi mesin balancing, calibration balancing machine, Upgrade mesin balancing Perbaikan mesin schenk, Hofmann, Nan Jung Electric, abro, JP ( Shanghai Jianping Dynamic Balancing Machine Manufacturing) , Shanghai shenman balancing machine, IRD Balancing, balanstar corporation, precibalance, universal balancing, balancing USA, JP-Balancer, simons balancing and machine, balance engineering, hines, kokusai, CEMB balancing machines, turbo technics, T & S Machines.
Dynamic Balancing di Work Shop atau Onsite: Balancing Impeller, Blower, Pulley, Rotor Breaker, Spindel Shaft, As Shaft Screw ( semua benda yang berputar) , Repair Impeller Blower.
Jakarta - Indonesia
Hubungi:
Sales & Service Agent dynamic balancing machine
PT VIBRASINDO
Jl. Radin Inten II No. 62 Duren Sawit
Jakarta 13440 Indonesia
Telp. 021-29563051 ( hunting)
sales@ vibrasindo.com
Fikri/ Zul : 0815 614 1954, 0813 992 919 09
Tampilkan Lebih Banyak