050 FBLS, 200 FBLS, 400 FBLS

050 FBLS, 200 FBLS, 400 FBLS Balancing Machines for Turbocharger Turbine Rotors • Automatic or semi-automatic balancing • Patented air bearing supports for highest measurement accuracy • Digital measured data processing and numerically controlled unbalance correction • Optional interfacing with gantry loader and commercially available conveyor system • Easy change over to other rotor types Design Multi-station machine with measuring and correction station and fully automatic or semi automatic operating sequence. Vertical balancing unit on vibration-optimized machine frame of aluminium profile, type-dependent, exchangeable precision air bearing support for the turbine rotor, drive by special drive plate with air jet adapted to the rotor diameter. Measured data processing by measuring unit CAB 750. Correction station with two digitally controlled processing units for unbalance correction by polar grinding on the hub and the rear side of the rotor. Automatic trueing unit for the grinding disc. Optional gantry loader system for linking the stations and connection of in-feed and out-feed conveyors. Range of application Measurement and correction of dynamic unbalance in machined turbocharger turbine rotors. Use of the machine in mid- and large-volume production. Fully / semi automatic unbalance measurement and correction by grinding in two planes and with up to two correction steps. Loading and unloading manually or by gantry loader. Sequence of operations • The work-piece is taken from the transfer equipment, provided with a reference mark and loaded into the measuring station • Automatic measuring run. Calculate and transfer measured values to the correction station, brake to zero rpm • Remove the rotor from the measuring station and load into the correction station • Automatic correction: clamp, index to the correction position for the 1st plane, adjust the grinding unit, controlled grinding of a sector. Index to the corretion position for the 2nd plane, repeat the grinding process and unclamp • Transfer the rotor to the measuring station and start the check run. If the rotor is not in tolerance after the 1st correction step a 2nd correction step can be carried out • Remove the work-piece and unload. The work-piece handling can be done manually or by means of a loading system Distributor agent penjualan service Repair mesin balancing, Balancing system for miniature high-speed rotors, Desktop balancing machines, horizontal balancing machines, vertical balancing machines. Kalibrasi mesin balancing, calibration balancing machine, Upgrade mesin balancing Perbaikan mesin schenk, Hofmann, Nan Jung Electric, abro, JP ( Shanghai Jianping Dynamic Balancing Machine Manufacturing) , Shanghai shenman balancing machine, IRD Balancing, balanstar corporation, precibalance, universal balancing, balancing USA, JP-Balancer, simons balancing and machine, balance engineering, hines, kokusai, CEMB balancing machines, turbo technics, T & S Machines. Dynamic Balancing di Work Shop atau Onsite: Balancing Impeller, Blower, Pulley, Rotor Breaker, Spindel Shaft, As Shaft Screw ( semua benda yang berputar) , Repair Impeller Blower. Jakarta - Indonesia Hubungi: Sales & Service Agent dynamic balancing machine PT VIBRASINDO Jl. Radin Inten II No. 62 Duren Sawit Jakarta 13440 Indonesia Telp. 021-29563051 ( hunting) sales@ vibrasindo.com Fikri/ Zul : 0815 614 1954, 0813 992 919 09